| PDF Export | |
Mat.No. 1.0501/DIN C35/AISI 1035
Osaka
Carbon steel, medium carbon steel. This steel grade has simular propeties as the steel CK35.
Designation by Standards
| Mat. No. | DIN | EN | AISI |
| 1.0501 | C35 | - | 1035 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.35 | max. 0.40 | 0.65 | max. 0.40 | max. 0.10 | max. 0.40 | - | - | (Cr+Mo+Ni) = max. 0.63 |
Applications
Applications include levers, bolts, studs, nuts, and similar parts which are headed, upset, or extruded. Applications for wires include nails requiring high shank rigidity or strength and quench-hardened nails.
Physical properties (average values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 200
Density [g/cm3]: 7.87
Thermal conductivity [W/m.K]: 43.6
Coefficient of Linear Thermal Expansion 10-6 oC-1
| 20-100oC | 20-200oC | 20-300oC | 20-400oC | 20-500oC | 20-600oC | 20-700oC |
| 11.1 | 11.9 | 12.7 | 13.4 | 14.0 | 14.4 | 14.8 |
Soft Annealing
See the steel CK35.
Stress Relieving
See the steel CK35.
Hardening
See the steel CK35.
Tempering
See the steel CK35.
Hot forming temperature
See the steel CK35.
Machinability
See the steel CK35.
Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. There is no representation that the recipient of this literature will receive updated editions as it become available.
Carbon steel, medium carbon steel. This steel grade has simular propeties as the steel CK35.
Designation by Standards
| Mat. No. | DIN | EN | AISI |
| 1.0501 | C35 | - | 1035 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.35 | max. 0.40 | 0.65 | max. 0.40 | max. 0.10 | max. 0.40 | - | - | (Cr+Mo+Ni) = max. 0.63 |
Applications
Applications include levers, bolts, studs, nuts, and similar parts which are headed, upset, or extruded. Applications for wires include nails requiring high shank rigidity or strength and quench-hardened nails.
Physical properties (average values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 200
Density [g/cm3]: 7.87
Thermal conductivity [W/m.K]: 43.6
Coefficient of Linear Thermal Expansion 10-6 oC-1
| 20-100oC | 20-200oC | 20-300oC | 20-400oC | 20-500oC | 20-600oC | 20-700oC |
| 11.1 | 11.9 | 12.7 | 13.4 | 14.0 | 14.4 | 14.8 |
Soft Annealing
See the steel CK35.
Stress Relieving
See the steel CK35.
Hardening
See the steel CK35.
Tempering
See the steel CK35.
Hot forming temperature
See the steel CK35.
Machinability
See the steel CK35.
Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. There is no representation that the recipient of this literature will receive updated editions as it become available.
