| PDF Export | |
AISI 1213
Osaka
Non alloy quality steels. Steel with higher S content.Designation by Standards
| Mat. No. | DIN | EN | AISI |
| 1.0715 | 9SMn28 | - | 1213 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| max. 0.14 | max. 0.05 | 1.10 | - | - | - | - | - | S = 0.30 |
Applications
Free-cutting steel, case-hardening steel. Serial production elements for vehicles, devices, plants.
Physical properties (average values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.85
Core Hardening
Harden from a temperature of 880-920oC followed by water quenching.
Tempering
Tempering temperature: 150-200oC.
Forging
Hot forming temperature: 1050-850oC.
Forms manufactured
Please see the Dimensional Sales Program.Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. There is no representation that the recipient of this literature will receive updated editions as it becomes available.Unless otherwise specified, registered trademarks are property of Metal Ravne company. Copyright 2015 by Metal Ravne. All rights reserved. Contact our Sales Office for more information.
Non alloy quality steels. Steel with higher S content.Designation by Standards
| Mat. No. | DIN | EN | AISI |
| 1.0715 | 9SMn28 | - | 1213 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| max. 0.14 | max. 0.05 | 1.10 | - | - | - | - | - | S = 0.30 |
Applications
Free-cutting steel, case-hardening steel. Serial production elements for vehicles, devices, plants.
Physical properties (average values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.85
Core Hardening
Harden from a temperature of 880-920oC followed by water quenching.
Tempering
Tempering temperature: 150-200oC.
Forging
Hot forming temperature: 1050-850oC.
Forms manufactured
Please see the Dimensional Sales Program.Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. There is no representation that the recipient of this literature will receive updated editions as it becomes available.Unless otherwise specified, registered trademarks are property of Metal Ravne company. Copyright 2015 by Metal Ravne. All rights reserved. Contact our Sales Office for more information.
