| PDF Export | |
Mat.No. 1.1201/DIN Cm45/AISI 1045
CM45 is a medium carbon steel is used when greater strength and hardness is desired than in the 'as rolled' condition. Extreme size accuracy, straightness and concentricity combine to minimize wear in high speed applications. Turned, ground and polished.
Designation by Standards
| Mat. No. | DIN | EN | AISI |
| 1.1201 | Cm45 | C45E | 1045 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.46 | max. 0.40 | 0.65 | max. 0.40 | max. 0.10 | max. 0.40 | - | - | (Cr+Mo+Ni)=max. 0.63 |
Applications
Component parts for vechiles, shafts, bushings, crankshafts, connecting rods and parts for the machine building industry and steel for axes, knives, hammers, etc.
Physical properties (average values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 190-210
Density [g/cm3]: 7.84
Soft Annealing
Heat to 650-700oC, cool slowly. This will produce a maximum Brinell hardness of 207.
Hardening
Harden from a temperature of 820-850oC, 830-860oC followed by water or oil quenching.
Normalizing
Normalizing temperature (oC): 840-880oC.
Tempering
Tempering temperature: 550-680oC.
Forging
Hot forming temperature: 1100-850oC.
Machinability
Machinability is good, rated at 80% that of the AISI 1112 alloy used as a 100% machining rated steel.
Forms manufactured
Please see the Dimensional Sales Program.
Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. There is no representation that the recipient of this literature will receive updated editions as the become available. Unless otherwise specified, registered trademarks are property of Metal Ravne company. Copyright 2015 by Metal Ravne. All rights reserved. Contact our Sales Office for more information.
CM45 is a medium carbon steel is used when greater strength and hardness is desired than in the 'as rolled' condition. Extreme size accuracy, straightness and concentricity combine to minimize wear in high speed applications. Turned, ground and polished.
Designation by Standards
| Mat. No. | DIN | EN | AISI |
| 1.1201 | Cm45 | C45E | 1045 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.46 | max. 0.40 | 0.65 | max. 0.40 | max. 0.10 | max. 0.40 | - | - | (Cr+Mo+Ni)=max. 0.63 |
Applications
Component parts for vechiles, shafts, bushings, crankshafts, connecting rods and parts for the machine building industry and steel for axes, knives, hammers, etc.
Physical properties (average values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 190-210
Density [g/cm3]: 7.84
Soft Annealing
Heat to 650-700oC, cool slowly. This will produce a maximum Brinell hardness of 207.
Hardening
Harden from a temperature of 820-850oC, 830-860oC followed by water or oil quenching.
Normalizing
Normalizing temperature (oC): 840-880oC.
Tempering
Tempering temperature: 550-680oC.
Forging
Hot forming temperature: 1100-850oC.
Machinability
Machinability is good, rated at 80% that of the AISI 1112 alloy used as a 100% machining rated steel.
Forms manufactured
Please see the Dimensional Sales Program.
Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. There is no representation that the recipient of this literature will receive updated editions as the become available. Unless otherwise specified, registered trademarks are property of Metal Ravne company. Copyright 2015 by Metal Ravne. All rights reserved. Contact our Sales Office for more information.
