Mat.No. 1.1011/DIN RFe160
Osaka
Non alloy special steels. Steel with special physical properties. Designation by Standards.
| Mat. No. | DIN | EN | AISI |
| 1.1011 | RFe160 | - | - |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| max. 0.10 | max. 0.10 | 0.70 | - | - | - | - | - | Al = 0.07 |
Applications
Soft magnetic materials for direct current relays.
Physical properties (avErage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.85
Soft Annealing
Brinell hardness in annealed condition is 80-135.
Normalizing
Please ask.
Hardening
Please ask.
Tempering
Please ask.
Forging
Hot forming temperature: 1050-850oC.
Forms manufactured
Please see the Dimensional Sales Program.
Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. There is no representation that the recipient of this literature will receive updated editions as the become available. Unless otherwise specified, registered trademarks are property of Metal Ravne company. Copyright 2015 by Metal Ravne. All rights reserved. Contact our Sales Office for more information.
Non alloy special steels. Steel with special physical properties. Designation by Standards.
| Mat. No. | DIN | EN | AISI |
| 1.1011 | RFe160 | - | - |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| max. 0.10 | max. 0.10 | 0.70 | - | - | - | - | - | Al = 0.07 |
Applications
Soft magnetic materials for direct current relays.
Physical properties (avErage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.85
Soft Annealing
Brinell hardness in annealed condition is 80-135.
Normalizing
Please ask.
Hardening
Please ask.
Tempering
Please ask.
Forging
Hot forming temperature: 1050-850oC.
Forms manufactured
Please see the Dimensional Sales Program.
Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. There is no representation that the recipient of this literature will receive updated editions as the become available. Unless otherwise specified, registered trademarks are property of Metal Ravne company. Copyright 2015 by Metal Ravne. All rights reserved. Contact our Sales Office for more information.
