PRODUCT CATEGORY

HOT PRODUCTS

loading

Mat.No. 1.2827/DIN 44MnSiV4

Low alloyed cold working tool steel.
 
Availability:

PDF Export

facebook sharing button
twitter sharing button
whatsapp sharing button
wechat sharing button
sharethis sharing button
  • Mat.No. 1.2827/DIN 44MnSiV4

Designation by Standards

Mat. No.DINENAISI
1.282744MnSiV4--


Chemical Composition (in weight %)

CSiMnCrMoNiVWOthers
0.441.151.15---0.12--


Applications
Steels for Pilger rolls.


Physical properties (average values) at ambient temperature

Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.80


Stress Relieving

Stress relieving to remove machining stresses should be carried out by heating to approx. 650oC, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.


Forging

Hot forming temperature: 1050-850oC.


Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. There is no representation that the recipient of this literature will receive updated editions as it becomes available.


Previous: 
Next: 

GET A FREE QUOTE

  • Building #32, No.288 XinzhuanRoad, Shanghai, China
  • E-email us:
    inquiry-carbon@ninesteel-cs.com
  • call us on:
    +86-21-67890007